Home About Us Simulation Products Applied R&D Consultation Multimedia Support Contact
< Return to Products
Product Description:

 

In pursuit of continuous improvement and technological leadership, Survival Systems Limited has developed the METS™ Model 12000 XGH™ handling system.  The system provides the client with the highest level of safety, reliability, and user friendly options that is available for aircraft ditching training today. The XGH™ monitoring and expandable control functions offer the client accurate, repeatable, and document-able training routines, as well as the ability to control and sequence other training devices such as wind, waves, rescue hoist systems, and other environmental variables for a complete and state-of-the-art training system.

Ø           The METS™ Model 12000 XGH™ is a cross gantry hoisting system and features dual lifting mechanisms, integrated METS™ remote air brake system, user settable variable ditching speeds, advanced ditching monitoring, effects sequencing and control, as well as a pneumatically operated redundant retraction system (RRS) to mitigate the risk of power failures during critical (submerged) periods of the helicopter underwater escape training (HUET) training cycle.

Ø           The system is a cost effective, retrofit design for replacing aging hoist system, is very easy to use, and can be installed indoors, outdoors, in pre-existing or new facilities as required.

Features

Ø           When mounted on a 24,000 lbs SWL structure, the XGH™ is fully compliant with all industry personnel lift guidelines and standards, including ASME B30 series, EN 13000 series, applicable CSA guidelines, and NAVFAC P-307. The Model XGH™ is a 24,000 lbs static lift system de-rated by 50% to a 12,000 lbs personnel working load.

Ø           Complete duality in variable frequency drive lifting mechanisms, VFDs (2), motors (2), gear boxes (2), drums (2), and cables (2). Each system is capable of independently holding and handling the load through the XGH leveling block system.

Ø           Additional Safety Features include: Independent motor brakes (2) – Pneumatically Operated Redundant Retract System (1) – Integrated Electrical Ground Fault Personnel Protection (1) – Radio Remotes (2) Pendant Crane Control (1) – User Friendly Operator Interface and On-Screen Guide (1) - Operator Training – Installed at Customer’s Site.

Specifications

Ø            Operating Capacity

v             5454 Kg (12000 lbs) Gross Personnel-Lift

v             Used with: METS™ Model 1, 3, 5, 30 and 40, Apache METS™ and MPM

Ø            Trolley Travel

v             10.7m (35 t) from service platform area of gantry outwards

Ø            Lift

v             6.1m (20 ft) Nominal minimum, and adjustable for safety in more shallow depth pools.

 

Ø            Operating Speed

v             Slow raise / lower 3.0m/min (9.8 ft/min)

v             Fast raise 10m/min (32.8 ft/min)

v             Available ditching speed 19-30 m/min (62 – 98.4 ft/min) adjustable through operator interface

v             Recommended ditching speed 20m/min (65.6 ft/min)

v             Traverse slow 3.0m/min (9.8 ft/min)

v             Traverse fast 10m/min (32.8 ft/min)

 

Ø            Electrical Interface

v            46kVA, 3-phase 50-60 Hz, 380-500 VAC service, TN/TT or IT systems

 

 

XGH™ and METS™ Model 40 at U.S. Marine Corps Base in Kaneohe Bay, Hawaii
XGH™ Drive Motor Bank
XGH™ and SVET™ at U.S. Marine Corps Base on Okinawa, Japan
XGH™ and METS™ Model 40 at Survival Systems USA's STST™ at their facility in Groton, Connecticut
 
Home  |   About Us  |  Simulation Products  |  Applied R&D  |  Consultation  |  Multimedia  |  Support  |  Contact
© 2014 Survival Systems Limited. All rights reserved.
Website Design by Amplify Media